Case Study

Sintering Machine CO Removal — Field Test

Field test of CO oxidation catalyst performance on an industrial sintering machine flue gas stream.

Reported field test result — test date 2022-08-23

CO: 1,499 ppm → 18 ppm

Reported result

The original field test record reports CO concentration reduced from 1,499 ppm to 18 ppm on 2022-08-23.

Derived removal efficiency

On the reported inlet/outlet pair, single-pass CO removal was 98.8% ((1,499 − 18) / 1,499). This is arithmetic on the recorded values — it is not a design guarantee, because the operating conditions behind the measurement are not published.

Data completeness note

For full engineering evaluation, the following data should be attached to the original record. A complete field-list and blank template are published in the Knowledge Center Field Test Report Template.

  • Gas flow rate
  • Operating temperature
  • O₂ concentration
  • CO inlet / outlet concentration
  • Catalyst volume
  • Space velocity
  • Reactor dimensions
  • Continuous operating time
  • Test instrument and testing organization

What this case demonstrates

The test shows the CO oxidation catalyst achieving high single-pass conversion on a real sintering stream. Sintering flue gas CO control is one of our documented application areas.

Engineering takeaways

What the record shows is a point measurement: CO at the catalyst outlet reduced from a reported inlet of 1,499 ppm to 18 ppm under the test conditions of 2022-08-23. What a full evaluation needs is the accompanying context — flow rate, temperature profile, oxygen content, moisture, SO₂ and dust at the test position — to convert a point result into a sizing basis.

For engineering follow-up we recommend a repeat measurement campaign that captures the CO range over normal operation, including charge cycles and upset periods, plus catalyst inlet/outlet temperature. That data supports reactor sizing for the peak rather than the average.

How this test is classified

This record is registered in the Knowledge Center Evidence Registry, which states its data type, verification status and the conditions not published.

Related products

Discuss a similar application

Planning CO or VOC control on a comparable stream? Share your operating conditions with us.